Activity Feed › Discussion Forums › Strictly Surveying › Prism Rod Protection
Prism Rod Protection
Posted by Scott Bordenet on July 7, 2020 at 3:06 pmI have protected prism rods in the bed of the truck with one of two methods: (1) PVC pipe sleeves and (2) styrofoam housing insulation. Are there other ways? Opinions? Ideas?
john-putnam replied 3 years, 9 months ago 10 Members · 11 Replies- 11 Replies
I suspend my rod from the roof of the topper with a web fishing rod holder. That way they are out of the way and do not vibrate out of adjustment. I do have PVC tubes for level rods and signs.
Similar to the fishing rod holder which might have been a better idea, I attached a piece of 1×3 with holes drilled in it to one of the forward ribs on the ceiling of the van for the pointy end of the rod. The business end is held in place with a broom holder attached to another ceiling rib. This holds all the poles in our van out of the way and they don’t rattle around. I never leave the glass attached though.
I would love to see photos of these solutions. I wonder about gun rack style holders? Like these:
https://www.cabelas.com/shop/en/kolpin-atv-rhino-grips-single-attachment-system
With any style of holder a primary concern is that the thing won’t become a javelin in a traffic accident. Keeping it from rattling around comes second, and economy of truck space is third.
Here is my setup. I’ve had these particular straps for 15 plus years and the Velcro enclosures on the back gave up the ghost long ago. They have been replaced by the white cord. I should thing about finding a new set but these still get the job done.
The tubes on the opposite wall hold road signs and a 25ft fiberglass rod.
I am in South Carolina, thanks to all about being inventive, I am getting down to a Honda Crv.
Kinda tough on carrying everything but. Tough as Hades vehicle.
Again thAnks and be safe
@norman-oklahoma
That’s the first thing I thought of. Maybe pointy end toward the vehicle side.
The tie down u-bolts in my 2002 Tacoma work great for that.
FYI,
A quick and dirty replacement for velcro ties that go bad is to replace them with velcro cable ties. I use them for the bottom of bi-pods, and my brush hook case. Easy to use 1 to extend another one too if you need.
https://www.amazon.com/VELCRO-Brand-Reusable-Fastening-Organizing/dp/B001E1Y5O6
After looking at the photos I decided it was time to part w/ $20 and replace it with a crisp new model. I found them on Amazon. I had some of Velcro strips before I went to the rope. The real thing is quicker, holds better and looks a pit more sharp. Besides, Jeff needs my money 😉 .
Log in to reply.